ZMXR 5V 1 CHANNEL SSR SOLID STATE RELAY LOW LEVEL TRIGGER 2A 240V
Código: 196945
Etiquetas: ZMXR, 5V, CHANNEL, SSR, SOLID, STATE, RELAY, LOW, LEVEL, TRIGGER, 2A, 240V, ROBOTICA
$ 3.690
Disponible sólo en tienda:
Mall Apumanque (3 unidades)
ZMXR 5V 1 CHANNEL SSR SOLID STATE RELAY LOW LEVEL TRIGGER 2A 240V
1.Input power supply:5V DC (160MA).
2.Specification (1 / 2 At Optional):1. State of 0-1.5V low level relay ON;State of 2.5-5V high level relay OFF;State of 0-2.5V low level relay ON;State of 3-5V high level relay OFF.
3.Interface:DC+:connect to positive(according to the relay voltage supply); DC-:connect to negative,CH relay module signal triggering side (high level trigger active).
4.Trigger voltage:low level 0-2.5V, high default 3.5-5V (in the case of voltage 12V trigger, you need a series resistance of a 5.1-6.8K before the trigger; 24V voltage trigger, you need a 15-22K resistors in series before the trigger, otherwise it will burn the chip).
5.Voltage:low voltage.
6.Static current:0mA .
7.Working current:12.5mA.
8.Trigger current:2mA.
9.Weight:13g.
10.Pack Size:25*34*25mm.
2.Specification (1 / 2 At Optional):1. State of 0-1.5V low level relay ON;State of 2.5-5V high level relay OFF;State of 0-2.5V low level relay ON;State of 3-5V high level relay OFF.
3.Interface:DC+:connect to positive(according to the relay voltage supply); DC-:connect to negative,CH relay module signal triggering side (high level trigger active).
4.Trigger voltage:low level 0-2.5V, high default 3.5-5V (in the case of voltage 12V trigger, you need a series resistance of a 5.1-6.8K before the trigger; 24V voltage trigger, you need a 15-22K resistors in series before the trigger, otherwise it will burn the chip).
5.Voltage:low voltage.
6.Static current:0mA .
7.Working current:12.5mA.
8.Trigger current:2mA.
9.Weight:13g.
10.Pack Size:25*34*25mm.
Otras personas también compraron:
